Designed to fit any application, our Multiple Point Monitor can be completely customized to monitor, alarm, and allow set point adjustment for any sensor, contact, or network point (up to three points). It also includes an “Additional Info” screen where a facility can display unlimited additional network points (4 at a time).
The CRC-MPM allows the user to setup individual visual and audible caution and alarm set points. Each monitor communicates values thru analog outputs, relays or communication protocol. The user can independently configure the 4 analog outputs to either mirror analog inputs or communicate set point adjustments.
The CRC-MPM is excellently suited for life science, healthcare, laboratory, vivarium, institutional and manufacturing environments.
|
Design Challenges / Market Needs |
MPM's Solution to Challenge |
| 1 |
Graphical user interface that supports any application |
Applying CRC touchscreen monitor technology with highly configurable interface and I/O options |
| 2 |
Alert personnel when values are outside of acceptable parameters |
MPM allows user to independently set high and low alarm and caution threshholds |
| 3 |
Design a device that is capable of receiving a signal from any sensor, relay, or network point |
MPM has configurable to process values from a 0-5 volt, 0-10 volt, 4-20mA, digital, or network source |
| 4 |
Communicate set point change |
MPM is capable of communicating set point via analog signal or network value |
| 5 |
View values from a distance (accross the room) |
Vivid full color LCD that automatically adjusts font to largest possible size (100+ pt) |
| 6 |
Aesthetically pleasing |
Refined graphics with unique clean design |
|
Specifications:
Dimensions:
- Face plate: H 6”, W 7.5”, D 3.5”
- LCD Touch Screen: 4" Diagonal
- Optional 5.7” screen available
Network / Communications:
- RS485 physical network
- BACnet MS / TP
4 Analog inputs:
- Jumper selectable
- 0-5v, 0-10v, 4-20mA
4 Analog outputs:
- Jumper selectable
- 2 Voltage outputs 0-5v or 0-10v
- 2 4-20mA outputs
4 Digital Inputs
4 Relays:
- All Relays normally open circuit (fail)
- All Relays - Max Rated @ 12volts at 500mA
Controller:
- Watchdog Function – monitors its own operation to ensure that it is working properly
- Field changeable password
- Complete unit uses .75 amps at 24 volts – total power consumption at 18 VA.
Features:
- Bright / sunlight readable 4” or 5.7" LCD touch screen.
- Displays large, easy to read values for 1 to 3 environmental element(s) along with status, visual alarm, and audible alarm.
- Each point can display values based on analog input (0-5v, 0-10v, 4-20mA), digital input, or network.
- Independently allow or restrict user’s access to change set-point value of each point.
- Set-point values can be communicated by bth analog output and / or network communication.
- Resistive touch control - Use bare finger, gloved finger, or stylus to interact with LCD screen.
- All parameters / settings saved in non-volatile memory (retained if module loses power).
- Field configurable, easy, and intuitive menus.
- Audible Alarm Silence
- Bright / sunlight readable 4” or 5.7" LCD touch screen.
- Displays large, easy to read values for 1 to 3 environmental element(s) along with status, visual alarm, and audible alarm.
- Each point can display values based on analog input (0-5v, 0-10v, 4-20mA), digital input, or network.
- Independently allow or restrict user’s access to change set-point value of each point.
- Set-point values can be communicated by both analog output and / or network communication.
- Resistive touch control - Use bare finger, gloved finger, or stylus to interact with LCD screen.
- All parameters / settings saved in non-volatile memory (retained if module loses power).
- Field configurable, easy, and intuitive menus
- Audible Alarm Silence
|
